← Back to Guides
How Much Does a 24x24 Concrete Slab Cost in 2026?
Published by ContractorCalc Hub Technical Team • 6 min read
Typical Cost Summary
A standard 24x24 foot concrete slab (576 sq. ft.) costs between $3,450 and $5,200 for DIY materials, or $4,800 to $8,600 professionally installed.
That equals roughly $6.00 to $9.00 per square foot for basic pours, or $10.00 to $15.00 per square foot with thickened edges and pump truck service.
Volume Calculation for a 24x24 Foot Slab
A 24x24 garage pad poured at a standard 4-inch depth requires 7.11 cubic yards of concrete before waste margins. With a recommended 10% job-site buffer, order 7.8 to 8.0 cubic yards.
If pouring a 5-inch vehicular slab, volume increases to 8.89 cubic yards (9.8 yards with waste). That is roughly one full ready-mix delivery truck.
Itemized Material Cost Breakdown (DIY vs Contractor)
| Expense Category | Quantity / Specs | Estimated Cost |
|---|---|---|
| Ready-Mix Concrete | 8 Cubic Yards (3,500 PSI) | $1,150 - $1,400 |
| Gravel Base (#57 Stone) | 4 inches depth (approx. 10 tons) | $450 - $650 |
| Steel Reinforcement | #4 Rebar (1/2") in 18" grid + chairs | $320 - $480 |
| Lumber Formwork & Stakes | 2x4 / 2x6 framing boards + duplex nails | $180 - $260 |
| Vapor Retarder (10 mil) | Polyethylene roll + seam tape | $90 - $140 |
| Total DIY Material Cost | Self-Performed Labor | $2,190 - $2,930 |